Polyvinyl pyridines as flocculating agents

Summary High molecular weight poly 2- and 4-vinyl pyridines were synthesized by ionic polymerisation and their flocculation efficiency tested against kaolin and silica dispersions at pH 3. Low additions of the polymers, around 3 parts per 10₃ parts solid, destabilize the dispersions and clarify silica dispersions to a remarkable extent; however, over-addition of polymer leads to partial restabilization. The flocculation efficiency improves with increase of solids content, especially with clay dispersions. Flocculation efficiency increases with polymer molecular weight, especially over the lower part of the range covered, but is relatively independent of pH in the range 2–4. Quaternization of poly(4-vinyl pyridine) with bromobutane produces a good flocculant for aqueous silica dispersions in which the degree of restabilization on over-dosing depends on the KCI content. TheN-oxide derivatives of the vinyl pyridine polymers do not affect the colloidal stability of silica dispersions. The observations are interpreted in terms of bridging flocculation by the cationic polymer molecules between anionic surface sites on the solid particles.     

Ultrathin polymer film formation by collision-induced cross-linking of adsorbed organic molecules with hyperthermal protons

A new synthetic approach for the formation of ultrathin polymer films with customizable properties was developed. In this approach, the kinematic nature of proton collisions with simple organic molecules condensed on a substrate is exploited to break C-H bonds preferentially. The subsequent recombination of carbon radicals gives a cross-linked polymer thin film, and the selectivity of C-H cleavage preserves the chemical functionalities of the precursor molecules. The nature and validity of the method are exemplified with theoretical results from ab initio molecular dynamics calculations and experimental evidence from a variety of characterization techniques. Its applicability is demonstrated by the synthesis of ultrathin polymer films with precursor molecules such as dotriacontane, docosanoic acid, poly(acrylic acid) oligomer, and polyisoprene. The approach is fundamentally different from conventional chemical synthesis as it involves an unusual mix of physical and chemical processes including charge exchange, projectile penetration, kinematics, collision-induced dissociation, inelastic energy transfer, chain transfer, and chain cross-linking.     

Reversible replication between ordered mesoporous silica and mesoporous carbon

Highly ordered mesoporous silica can be regenerated from a mesoporous carbon CMK-3 that is a negative replica of mesoporous silica SBA-15, indicating reversible replication between carbon and inorganic materials.     

Radioactivity contents in building materials used in Hong Kong

The radioactivity contents in building materials used in Hong Kong were measured to determine the sources of the high indoor radon concentrations observed in local buildings. The radium contents and the radon emanation coefficients of different building materials were measured by high resolution γ-ray spectroscopy using germanium detectors. The radon exhalation rates were measured using scintillation cells by circulating the exhaled radon from building materials and obtaining the initial growth rates. The radium content and the radon exhalation rates of concrete and bricks used in Hong Kong were found to be higher than those in some other countries, resulting in high indoor radon concentrations probably due to the high radioactivity contents in the aggregates, granitic in nature, used in building materials.     

High levels of soluble herpes virus entry mediator in sera of patients with allergic and autoimmune diseases

Herpes virus entry mediator (HVEM) is a newly discovered member of the tumor necrosis factor receptor (TNFR) superfamily that has a role in herpes simplex virus entry, in T cell activation and in tumor immunity. We generated mAb against HVEM and detected soluble HVEM (SHVEM) in the sera of patients with various autoimmune diseases. HVEM was constitutively expressed on CD4(+) and CD8(+) T cells, CD19(+) B cells, CD14(+) monocytes, neutrophils and dendritic cells. In three-way MLR, mAb 122 and 139 were agonists and mAb 108 had blocking activity. An ELISA was developed to detect sHVEM in patient sera. sHVEM levels were elevated in sera of patients with allergic asthma, atopic dermatitis and rheumatoid arthritis. The mAbs discussed here may be useful for studies of the role of HVEM in immune responses. Detection of soluble HVEM might have diagnostic and prognostic value in certain immunological disorders.     

Ethanol Washing Effect on Textural Properties of the Sodium Silicate-Derived Silica Xerogel

This study deals with the use of ethanol as washing solvent in the preparation of the silica gels from sodium silicate in order to enhance the textural properties, especially surface area. We here examined the effect of ethanol-washing on surface area, micro- and mesopore volume, and average pore size. The silica xerogels prepared from sodium silicate solution exhibited an extremely high surface area of 1139 m2/g by washing their hydrogels with ethanol. Compared to water-washed xerogels, ethanol-washed xerogels showed higher surface areas, total pore volumes, and larger average pore sizes. Unlike the surface area of water-washed xerogel, that of the ethanol-washed xerogel was not affected by the silica concentration of initial solution. This study indicates that the textural properties of sodium silicate-derived xerogels are further enhanced by using ethanol as washing solvent.     

Oxygen evolution reaction: a perspective on a decade of atomic scale simulations

Multiple strategies to overcome the intrinsic limitations of the oxygen evolution reaction (OER) have been proposed by numerous research groups. Despite the substantial efforts, the driving force required for water oxidation is largely making the reaction inefficient. In the present work, we collected published studies involving DFT calculations for the OER, with the purpose to understand why the progress made so far, for lowering the overpotential of the reaction, is relatively small. The data revealed that the universal scaling relationship between HO* and HOO* intermediates is still present and robust, despite the variety in methods and structures used for calculating the binding energies of the intermediates. On the other hand, the data did not show a clear trend line regarding the O* binding. Our analysis suggested that trends in doped semiconducting oxides behave very differently from those in other oxides. This points towards a computational challenge in describing doped oxides in a realistic manner. We propose a way to overcome these computational challenges, which can be applied to simulations corresponding to doped semiconductors in general.

Multiple strategies to overcome the intrinsic limitations of the oxygen evolution reaction (OER) have been proposed by numerous research groups.     

咪唑啉纤维树脂分离富集/ICP-MS测定矿石中的痕量铂(Ⅳ)

本文提出了咪唑啉纤维树脂分离富集/ICP-MS测定矿石中痕量铂(Ⅳ)的方法。实验考察了影响咪唑啉纤维树脂分离富集痕量Pt(Ⅳ)的酸度、流速、洗脱液的组成、体积等因素,结果发现:在20%的王水介质中,Pt(Ⅳ)能定量吸附于树脂上并与大量其它金属分离;被吸附的Pt(Ⅳ)可用5%硫脲-1%HCl溶液定量洗脱,ICP-MS测定Pt(Ⅳ)的回收率为87%~102%。所建立的方法应用于硫镍矿管理样分析,其测定结果与推荐值吻合。     

高效液相色谱法测定大鼠血浆中的原儿茶酸

建立了大鼠血浆中原儿茶酸含量测定的高效液相色谱方法。采用的色谱柱为DiamondsilTM C18 柱(150 mm×4.6 mm,5 μm);流动相为乙腈-水(体积比为9∶91,用H3PO4 调pH至2.5);流速1.2 mL/min;检测波长260 nm;内标为对羟基苯甲酸。原儿茶酸的线性范围为0.050~3.20 mg/L,线性相关系数为0.9978，最低定量限为0.050 mg/L,日内和日间测定的精密度（以相对标准偏差表示）均低于7.0%,准确度（以相对误差表示）为-1.4%～2.6%；在0.050,0.40,3.20 mg/L低、中、高3个添加浓度水平下，血浆样品的提取回收率分别为83.4%,87.3%,91.1%。该方法简便,灵敏,准确,适用于大鼠体内原儿茶酸的药物动力学研究。     

The quenching of CdSe quantum dots photoluminescence by gold nanoparticles in solution

The photoluminescence (PL) of CdSe quantum dots (QD) in aqueous media has been studied in the presence of gold nanoparticles (NP) with different shapes. The steady state PL intensity of CdSe QD (1.5-2 nm in size) is quenched in the presence of gold NP. Picosecond bleach recovery and nanosecond time-resolved luminescence measurements show a faster bleach recovery and decrease in the lifetime of the emitting states of CdSe QD in the presence of quenchers. Surfactant-capped gold nanorods (NR) with aspect ratio of 3 and surfactant-capped and citrate-capped nanospheres (NS) of 12 nm diameter were used as quenchers in order to study the effect of shape and surface charge on the quenching rates. The Stern-Volmer kinetics model is used to examine the observed quenching behavior as a function of the quencher concentration. It was found that the quenching rate of NR is more than 1000 times stronger than that of NS with the same capping material. We also found that the quenching rate decreases as the length of the NR decreases, although the overlap between the CdSe emission and the NR absorption increases. This suggests that the quenching is a result of electron transfer rather than long-range (Forster-type) energy transfer processes. The quenching was attributed to the transfer of electron with energies below the Fermi level of gold to the trap holes of CdSe QD. The observed large difference between NR and NS quenching efficiencies was attributed to the presence of the [110] facets only in the NR, which have higher surface energy.